Companies like PTCL, TP-Link, D-Link use the default IP address 192.168.10.1. Using this default IP address 192.168.10.1, you all can enter into the router’s admin page. Not only you can enter the router’s page, but also you can make any changes you want.
The changes you can do are proxy settings, change the SSID number, LAN and WAN settings, Wi-Fi password can be changed, setting the IP address of your wish, required network settings, etc. But before you make any changes, the first step is to enter into your router’s login page.
For logging into your router’s page, you need some credentials to access, like username and password. You must enter your proper username and password so that you don’t face any login issues. If you forgot your username and password credentials then do not worry because we have provided you default username and password credentials.
Remember to update you from time to time as the updates are released by your manufacturer. The smooth flow of routers gives you a good connection, and communication is improved. Set the proper configurations of your router so that the router is not exposed to attackers.
What is 192.168.10.1 IP Address & How it is Used?
The IP address 192.168.10.1 is the private IP address and public IP address. You cannot find private IP addresses over the internet without NAT. These special private IP addresses don’t have to be connected to the main IP address registry. 192.168.10.1 IP address will help you access the router’s interface page.
Once you have credentials of username and password, you will reach the admin panel and do the different configurations. Configurations are important so that your router is not attacked by any hackers. Also, configurations help in a good flow of the network.
Read Also:
How to Log in to a Router Using 192.168.10.1 IP Address
Entry to the router’s admin page can happen with the help of IP address 192.168.10.1.
Using IP address 192.168.10.1, you can do any configuration you want. But first, you need to enter the login page of your router. Follow the steps to enter your router’s page.
Step 1: Go to the browser of your choice, say Chrome, Mozilla Firefox, Internet Explorer, Microsoft Edge, Opera, Safari. Open the browser.
Step 2: Type the IP address 192.168.10.1 in the search bar and hit enter.
Step 3: The router’s login page will open up. You will notice two input fields that are username and password. You need to fill in the credentials, username, and password.
Step 4: Fill out your router’s username and password.
There are many benefits of entering the login admin page of your router. SSID numbers can be changed, and new Wi-Fi passwords can be set, USB ports for drivers or printers, RADIUS server, malware, and spam protection, virtual LANs, or backup WAN port, and many others.
The main problem will be if you do not remember the username and password, then all these benefits won’t be accessible to you. So to access them, you need username and password credentials, we have listed the default username and password for your router’s IP address 192.168.10.1 is given below. Go through them and login to your router’s admin page.
192.168.10.1 Default Username and Password List
The default list of usernames and passwords of the router’s IP address 192.168.10.1 is as follows:
| Username | Password |
| admin | password |
| admin | admin |
| admin | 1234 |
| user | user |
| user | password |
| Admin | Password |
| admin | (empty) |
In the worst case, all these default usernames and passwords might not be in your favor. But don’t stress over that because we have a solution for that also. All these values fail, so check at the backside of your router for username and password.
Hopefully, that is your actual username and password you are looking for! Even if this fails, you then try out the manual provided by the manufacturer. Although you must have tried all the permutations and combinations for the username and password access and got tried by now for sure.
But there is one thing which you haven’t tried and must be unaware of it. They say save the best at last! This is the last resort for you to get your username and password of your router. Resetting your router will help you get your default username and password.
The default state means all the changes you made recently will be lost, and the router will boot back in the factory version. Resetting the router is very easy and simple.
Take a pin or a needle, hold the backside of your router, using a pin or needle, press it for about 10 – 15 seconds. That’s it, you are done. The router will start resetting itself, and now your router is in the default state.
Troubleshooting 192.168.10.1 Issues
While connecting to the IP address 192.168.10.1, you might face some issues. The issues do not necessarily have to be technical; it can be human errors too. And we all know how good humans are with getting errors! We are providing you with some errors you might face, so just go through them.
1. Wrong IP Address
Many users, most of the time, tend to type the wrong IP address that lands them an “unable to connect” issue. They either type the alphabet “l” instead of the number “1” or they insert semicolons or colons in place of dot.
These are common mistakes made by users, so make sure and be careful while you type the IP address 192.168.10.1. To save yourself from all the trouble, the best thing you can do is simply copy and paste the IP address 192.168.10.1 in the browser. Like this, you won’t face any issue.
2. No Physical Connection
For physical connection, you need a wired connection. A connection should be established between your router and your device. Your computer and router can be connected via a wired connection that is an Ethernet cable.
Yes. Ethernet cable will help you make a bridge between them. Routers require physical connection sometimes; hence using an ethernet cable will be apt for you. Using an ethernet cable, you will be able to access the IP address 192.168.10.1 of the router’s admin page.
3. Faulty Router
If you have carefully entered the IP address 192.168.10.1 and there are no issues in typing the IP address from your side then it will be a technical issue or your router is faulty.
The router settings might misbehave that must be the reason your router is misbehaving and not able to connect to the router’s interface. The best thing you can do is call your router manufacturer and get the router fixed as soon as possible.
Read Also:
Conclusion
By now, you all know that IP address 192.168.10.1 is not a public IP address. It is a private IP address 192.168.10.1. Private addresses are not reachable over the internet without NAT. Using routers of IP address 192.168.10.1 will help the users to create and set good features and also provide a good flow of the router.
Use IP address 192.168.10.1 to login to your router’s admin interface. Use username and password credentials and configure the required settings. I hope you had a good read and the article fulfilled your requirements you were looking for. If you still face any issues or have any doubts, then let us know. See you next time! Ciao!
