The 192.168.100.1 IP address is a very commonly used IP address. It is known to be used mainly for the configuration of devices. It plays an important role in helping devices connect to other devices in a router-based network setup.
The 192.168.100.1 IP address is very often confused with the IP address 192.168.1.100 because of the similarity in digits and structure. But there is a difference among both the IP addresses. 192.168.1.100 is more of a home network IP address. However, 192.168.100.1 is common among manufacturers.
Also, a lot of people make errors while entering IP addresses. The most widely committed error is of replacing 1 with the letter I or replacing 0 with the letter O.
Why Do We Need 192.168.100.1 Admin Panel
The admin panel is the sole way through which the user is able to configure devices to the router. It is impossible to amend the device configurations without logging in to the 192.168.100.1 IP address admin panel. Moreover, one cannot even add or remove previously connected devices without it.
To be able to track the execution of the devices connected to the router, admin panel access is important. In current times, there are many cases of cybercrimes. One of which is stealing data by intruding into your computer. Such a criminal is called a hacker, or particularly a data thief. Thus, to protect your system from these happenings, access to the admin panel is a must.
Read Also:
How to Login to 192.168.100.1 Administration Panel
If you’re looking to log into the admin panel of IP address 192.168.100.1, follow the steps mentioned below.
Step 1: Open any up-to-date web browser on your device. It is always better to have updated it to the newest version.
Step 2: You should find the option “Access Router Page”. Select this option. It will take you to the 192.168.100.1 IP address.
Step 3: The page that follows is the “user authentication page”. Here, you will need to feed in your default username and password. Click on “Enter” to continue.
You can start with the configuration of your devices on the administrator page of your IP address. In the admin panel, you are able to make changes, such as the name of your network or your internet connection type. You can alter other technicalities, such as moderate the transmission rate, bandwidth, etc.
You can add devices. You can also track any device connected to your router. It is recommended to put in a new username and password for your router. This will ensure safety from any threats to your privacy and security.
As you see, it is immensely simple and direct to log into the admin panel of the 192.168.100.1 IP address. This process requires no expertise in any form. Make sure that you know the default username and password of the router before trying to follow these steps. You will not be able to access the administration panel otherwise.
How to Recover Forgotten Password of 192.168.100.1 IP Address
A very common thing to happen with us humans is we forget our usernames and passwords very often. And we all know what a headache it is. Especially since we do not make use of them in our day to day lives. In the same way, users forget the IP address of their router. Without this, they are unable to access the admin panel of IP address 192.168.100.1. No reason to worry. There are ways in which you can retrieve your router IP address.
Your IP address is mentioned on a few documents where you can find it.
Method 1: Using The User Manual
This one is a given. The User Manual contains all the required information about the device. You never know when you might need to refer to this manual, so make sure to keep it safe. No matter what issue you have with your device, always look it up in its user manual.
Method 2: Look Behind the Router
Turn your device upside down and look for the sticker from the manufacturer. It usually contains details like default username, model number, and IP address.
Method 3: Reset the Router
This is the easiest method to gain access to the admin panel of the 192.168.100.1 IP address. Only resort to this method if you no longer remember the default username and password of your router. We will tell you two ways by which you can factory reset the router. Since you are resetting the router, you should understand that this process will reconfigure the router right from the launch.
Since the steps towards factory resetting the router to its default is different for every unique router, we advise you to refer to your user manual. You will find step-by-step instructions for doing this.
The last resort is the pinhole button. You can find it somewhere on the backside of the router. Just fit a paperclip into that hole to press the reset button. Hold the button for 15-30 seconds, and your router will be reset.
Router Username and Password List
Username | Password |
admin | password |
none | none |
admin | w2402 |
admin | admin |
n/a | n/a |
admin | motorola |
root | Model# of camera |
root | Model No. |
CARMEN | none |
none | W2402 |
The table above shows you some of the most common 192.168.100.1 Logins along with the password.
192.168.100.1 IP Address Issues
We have tried to cover most of the issues that arise with the 192.168.100.1 IP address. However, there are other less common problems. Overall, for a better and efficient user experience, make sure to follow the following guidelines.
- Always opt for stable power sources, like a UPS, during the configuration process.
- If you have a wired connection, make sure to use high-quality cables.
- Look out for the router lights, which will alert you of any other issues or problems that need attention.
Read Also:
Conclusion
We hope to have solved all of your queries and doubts regarding the 192.168.100.1 IP address. Always try to remember or keep written your username and password in a safe place to avoid any further complications. Also, preserve the user manual as it proves to be super useful and informative when any issue arises.