192.168.8.1 is the default IP address mostly used by modem or wireless routers. When you enter the IP address in the browser, the admin page of the router will open up. Huawei, Eminent, or GL.iNet these brands majorly use the 192.168.8.1 IP address.
We cannot say that IP address 192.168.8.1 is the only standard IP address for the routers because there are many other different IP addresses such as 192.168.1.1, 192.168.0.1, or 192.168.2.1. All these IP addresses are used for accessing the router. Hence it is called Default Gateway IP.
If there are any changes you want to do to your router then, you must enter into your router’s admin page. Getting into your router’s admin interface is very simple. Type the IP address in the browser, if you cannot find the IP address, then look at the backside of your router for the IP address.
Then enter the default credentials that are username and password. Now you are on the router’s admin page. Do the required changes as you want. Make sure you update your router as and when the updates are released by the manufacturer.
Keeping your router updated will give a smooth flow of your router and connection as well. Setting required connections also help for the better flow of the router.
What is 192.168.8.1 IP Address
The IP address 192.168.8.1 is known for its private C class address. Using the IP address 192.168.8.1, you can do any configurations such as change Wi-Fi password, SSID network, IP address of your wish, network settings, accessibility, etc. Setting up a good configuration of your router will give a smooth flow of your network.
Precautions to Take While Using 192.168.8.1 IP Address
Often while using the 192.168.8.1 IP address, there are many silly mistakes done by many of us. If you type something wrong or misleading letters, you are about to get an error, and you will not reach the IP address 192.168.8.1. The common mistakes we all tend to do is use commas, colons, or semicolons.
We should use dots while typing the IP address 192.168.8.1. And when you want to enter into the admin page of your router, type the IP address as “192.168.8.1” yes, just like that only IP address. Do not start with HTTP because HTTPS is used for normal links, and you are not visiting a web link, so keep that in mind.
The IP address 192.168.8.1 at last, there is numerical value “1” and not the alphabet “I” so do not type I instead of 1. These are the common mistakes we might mostly do so just do not repeat those and take care of it. Apart from human errors check that your router is turned on.
Then it will be like there are no errors from your side while typing the IP address 192.168.8.1, but you just forgot the main thing to do is forgot to switch on your router! Check if all the lights on your router are working properly and no red light is flickering. Check if you have connected to your router only.
How to Login into 192.168.8.1 IP Address
For logging into your router, you need credentials of username and password. 192.168.8.1 is the default IP address. With this IP address, you can reach your admin page. If you forgot your username and password, then do not worry.
Just look at the backside of your router for username and password. Once you get your hands on the username and password now, it’s time to enter into your 192.168.8.1 router admin page.
Follow the steps to enter the router admin page:
Step 1: Go to your browser and open it.
Step 2: Type the IP address 192.168.8.1 and enter it into your router admin page. Now, enter the default credentials that are the username and password of your router.
Step 3: The admin page loads your IP address. All the configurations are shown, such as internet setup, wireless, etc.
How to Recover Password and Username of 192.168.8.1 IP Address
Many times it happens that we tend to forget our username and password of our router. And if you have changed the username and password of the admin page recently, then you should note it down somewhere. If you haven’t, then it is a problem for you.
But there is always one door for you to get back to your router, and that is resetting your router to its default state. The default state is nothing but all the new settings done by you will be undone, and the settings that were given by the manufacturer will be set back.
When you reset your router, the changed username and password is also lost and the default username and password that is given on the back of the router will be applicable for you now. Or you can visit the router’s IP address 192.168.8.1 for the default username and password.
You can access the default usernames and passwords only when you have set back your router to reset or default state. For resetting your router, follow the below steps:
Step 1: Take any needle or a pin that will help you to reset your router.
Step 2: On the router, you will notice a red circled reset button. With the help of the pin or needle, press the reset button. Press it for around 10 – 15 seconds.
Step 3: Now, all the lights will turn off and will start again. You have successfully set your router to its default state.
Step 4: Go to your router’s page and enter any default username and password.
But remember, all the changes you made are no longer in existence, as the router is completely in the default or reset state.
How to Find the IP Address of Your Router
If you are confused or not aware of your router’s IP address, then do not worry because, within some simple steps, you can get to know your IP address and login into your router successfully.
Step 1: Go to the Start Button and search for Command prompt. Click and open the Command prompt.
Step 2: Now, in the prompt type the command “ipconfig”. Ipconfig work is to list all the IP configuration details related to your Windows system. Among that list, you will find your IP address.
Step 1: Go and open the Terminal. Or go to the utility tab and look for Terminal.
Step 2: In the Terminal type the command “netstat-nr”. You will get the IP address displayed on the Terminal.
Now you know the IP address of your desired own systems. Once you get to know your IP address, then you can get into your router’s portal without any errors.
How to Change Your IP Address
Yes, it is possible. You heard it right, you can change your IP address according to your wish. First, you must enter into your router’s login page and get on the settings page. Once you login into the router’s page goes to the LAN tab.
In the LAN tab, you can change the desired IP address you want. Now type the IP address of your wish in the block. And the IP address is changed. Yes, it is that simple and easy, and it will get done within no minutes. Now, you can enjoy the IP address of your wish.
That was all for IP address 192.168.8.1 for you all. The admin login page, its usage, its login process in different systems, changing the IP address, finding your own IP address via the command prompt, the necessary measures to be taken while using the IP address 192.168.8.1, how to get back your default username, and password all the given above in detail.
All you need to do is read everything carefully before trying to attempt any changes. I hope you had a good read, and the article was helpful enough. Hoping I cleared all your doubts about the IP address 192.168.8.1. If you still have queries, then let us know. See you next time! Ciao!