The IP Address 10.0.0.138 has been registered as an authorized Internet Protocol address assignment by Internet Assigned Numbers Authority. It is a small part of the private network. IP addresses like 10.0.0.138 are never provided for any particular working organization as they (the IP addresses) are in their private space.
There is no need for permission to be granted by the Regional Internet Registry for using these types of IP addresses. Hence, you can access it freely. Telstra Corporation Limited, also famous as Telstra, originated in Australia. It is one of the largest telecommunications companies.
This company sets up and designs the telecommunications networks for the country. It also provides its service in voice, paid television, and, most important, access to mobile internet in the market. Customers are really satisfied with their services.
What is the Need to Access the Router Admin Panel?
10.0.0.138 modem settings are utilized when there is a requirement to change the name of the current network. It can be used to modify the passwords as well as enhance security. Settings can be for anything like DNS settings, password, Wi-Fi network name, modem’s default IP address, etc.
How to Login into 10.0.0.138 IP Address
Well! This is a plain sailing step to log into the 10.0.0.138 IP Address. Through this step, anyone can provide any modifications to the configuration of the router. Router settings can be changed as per the users’ wish when and where required.
Always remember to reboot the system when you are done with the modifications and settings for your 10.0.0.138 based on any brand’s router or modem. If not, then do it to avoid any unwanted situations. Always use the IP addresses to provide some changes to the Telstra routers.
Steps to login to the IP address are mentioned below. Do follow:
Step 1: In your opened address bar of the web browser, type 10.0.0.138 Address.
Step 2: Now press the Enter key after typing.
Step 3: Then, a small window opens on the top, asking for your login ID i.e., the username and the password.
Step 4: You are allowed to fill in the by default set username and the device’s password or router you are using. Click on the ‘login’ or ‘OK’ button then.
Step 5: If your username, as well as the password, has been modified, then enter the updated username and the password accordingly.
Step 6: New tab opens when the login process ends. This provides you with administrative access, which includes all the settings and the router’s interface.
You are free to provide modifications to any by-default settings, including the security settings. Always utilize the updated username and the password while logging into your administrative panel.
How to Find the Router’s IP Address?
Usually, the IP address, along with the login address, is described in the manual. It can also be described on the packaging box. If you are unable to find it on them, search for the model on the browser. You will be able to find the address.
The step is as follows to find the router IP on Windows:
Step 1: You need to press Win + R. A blank tab opens up as soon as you press.
Step 2: Type “cmd” in the text field and hit enter. Your screen has opened the command prompt by now.
Step 3: You’re required to type commands which will lead you to the network state and the IP. Then, hit enter.
Step 4: The by-default Gateway for the router is the 10.0.0.138 IP address.
The following step will lead you to the edit section of the modem settings you require to know its default address.
Step: Type the genuine URL for your modem, which is the IP address. If you are using NBN TM / Velocity / Cable type / ADSL modems, then enter the IP address of http://10.0.0.138, or you can go with – http://telstra.gateway/.
Now, you can change the Wi-Fi network name, DNS settings, Password, etc.
How to log in and Set Up Telstra Router?
Follow these steps to set up the Telstra Router:
Step 1: Remove the plug of any devices that might have usage of the telephone line connected to wall sockets. Now you are good to go. Provide connection to the Telstra Cable Adaptor.
Step 2: Then provide power to the Telstra Cable Adaptor.
Step 3: Modem should now be connected to network 10.0.0.138.
Step 4: Put your modem in on mood.
Step 5: For the device you want to provide connection, please connect it through the cable or Wi-fi.
Step 6: Now, your device boots-up. After that, it shows a connection with the network.
How to Troubleshoot Router Issues?
The scenario may arise where you can still log in through the IP address that you have entered to access the set-up page of the Telstra router previously. The reason could be your wrong entry of the IP address. Second, you may face this logging problem if you include a lot of Telstra devices on this identical 10.0.0.138 network.
The reason is that the devices might try to log in simultaneously on the same network and thus lead to a crash. The modem gives a specific address to its client to access the interface related to configuration and anything else.
The error message is viewed saying, “Impossible to contact the server.” This occurs when you type the default IP address of the modem. You can change the IP address belonging to the identical range like if you have 192.168.0.1, you can use 192.168.0.2 or if you have 10.0.0.1, then use 10.0.0.2 or vice-versa.
Just follow these steps:
Step 1: Reach the Administrator, followed by Commands.
Step 2: Now type this command: ipconfig ‘nvram get wan_ifname’:0 10.00.2 netmask 255.255.255.0.
Step 3: You can see the Save Startup button. Just click it.
Step 4: Type: iptables -t nat -I POSTROUTING -o ‘nvram get wan_ifname’ -j MASQUERADE (to permit access to the security).
Step 5: Hit the Save Firewall button.
Follow the steps well. You will not experience any difficulties as these are the plain sailing steps. Always remember to reboot the device you are using. This will really avoid unwanted situations further. If you wish to have a deep knowledge of this, I would advise you to visit the device’s official website.