The web interface is where you can access all the settings and are allowed to change all the settings. The control panel for your ASUS router is the web interface where you will perform the desired changed settings. But for accessing those changes, you need to enter into the ASUS router. In other words, you must log in to the ASUS router.
How To Login to an ASUS Router and Access The Setup Page
The requirements to access the ASUS Web interface
1. You need the ASUS router.
2. You require good network connectivity through LAN wire, or Wi-Fi will also work.
3. Updated Chrome browser.
These steps will help you set up the ASUS router and will guide and help you access the ASUS router’s interface.
Step 1: Make sure you are connected to your ASUS router.
For setting up the ASUS router pages, you must be connected to its network. Connect your Wi-fi or LAN cable to the ASUS router for making changes. If in case you forgot your Wi-Fi password, then an alternative for it LAN cable can be used, and it doesn’t require a password.
Step 2: Open your web browser and navigate to 192.168.1.1
For accessing the ASUS router page, open the chrome browser, and in the search field, type the following IP address 192.168.1.1. This is the common IP address of the ASUS router. If this IP address fails to work, then you can try using the default one. Default ASUS IP address will help you access the page. Once you are entering the IP address, the webpage will open up. You will notice login credentials over there.
Step 3: Enter the username and password for your ASUS router.
Make sure to enter the right login username and password and then click on sign in. If you forgot your username and password, look in the default ASUS credentials and reset them. Credentials are also available at the back of your router.
How to Configure your ASUS Router
Be careful before changing the ASUS router settings. You can also note down all the current settings, so if you go wrong somewhere and lose connection, then you can get back with that notes to the original settings. When you log in to the ASUS admin interface, then you are accessible to change any settings you want according to your need. Just note down the settings and don’t lose the connectivity.
What if my ASUS router or network stops working after a configuration change
While making setting changes, you lost your network connection; then you can start with your previous settings. You can also use the generic 30 30 hard reset trick. If you have noted down the settings, that is only the last thing to help you. If you still got access to the ASUS interface, then just log in and revert to the changed settings. Obviously, that will happen if you had written the settings previously.
